ZyXEL Communications OLT-1308 Скачать руководство пользователя страница 244

Страница: 244 / 314

Chapter 37 Introducing the Commands

OLT-1308 Series User’s Guide

244

copy running-config

tftp

Backs up the current configuration to a

file on a computer using TFTP.

tftp config

<index>

Restore a previous backup configuration

file to the device. The device will not use

the restored configuration until the next

restart.

flash <ip>
<remote-file>

Restores a previous backup

configuration file to the running

configuration.

disable

Exits Enable (or privileged) mode.

enable

Accesses Enable (or privileged) mode.

erase

running-config

Resets the current configuration to the

factory default settings.

user-config

Resets all settings to the factory defaults

except the following settings:
•

in-band management IP

•

SNMP

•

syslog

•

NTP time server

exit

Exits Enable (or privileged) mode.

help

Displays help information.

history

Displays a list of command(s) that you

have previously executed.

igmp-flush

Clears all IGMP information.

kick

tcp <session ID>

Disconnects the specified TCP session.

logout

Exits Enable (or privileged) mode.

mac-flush

Clears the MAC address table.

<port-number>

Removes all learned MAC address on

the specified port(s).

olt-reset

<port-list>

Resets the PON port. This clears the link

statistics and forces the ONUs to

reconnect.

onu
firmware-
upgrade

<port-number> <llid-
list>

Upgrades the firmware to the specified

ONU(s) on the specified port.

onu reset

<port-number> <llid-
list>

Resets the connection the ONU. This is

for troubleshooting purposes.

ping <IP|host-name>

Sends Ping request to an Ethernet

device.

[in-band|out-of-
band|vlan <vlan-
id> ][ size <0-
1472> ][ -t ]

Sends Ping request to an Ethernet

device in the specified VLAN(s) with the

specified parameters.

help

Displays command help information.

port-test

port <port> <llid-
list>

Starts the loopback test to the specified

ONU.

Table 90

Command Summary: Enable Mode (continued)

COMMAND

DESCRIPTION

Содержание OLT-1308



























































































































































































































































































































Результаты поиска

Содержание OLT-1308

Отзывы:

ZyXEL Communications OLT-1308, Руководство пользователя, Страница: 244 / 314

Результаты поиска

Содержание OLT-1308

Отзывы: