manualshive.com logo in svg

ZyXEL Communications OLT-1308, Руководство пользователя, Страница: 147 / 314

Поделиться
Скачать
ZyXEL Communications OLT-1308 Скачать руководство пользователя страница 147

 Chapter 20 Multicast

OLT-1308 Series User’s Guide

147

The following table describes the labels in this screen. 

20.4  IGMP Filtering Profile 

IGMP filter profiles allow you to control access to IGMP multicast groups. This allows you to 
have a service available to a specific IGMP multicast group. You can configure an IGMP filter 
profile for an IGMP multicast group that has access to a service (like a SIP server for 
example). Within a profile, configure an IGMP filter to specify the multicast IP address 
ranges. Then assign the IGMP filter profile to the ports (in the 

Multicast

 screen) that are 

allowed to use the service. 
Click

 Advanced Applications

 and 

Multicast

 in the navigation panel. Click the 

IGMP 

Filtering Profile 

link to display the screen as shown. 

Table 48   

Multicast 

LABEL

DESCRIPTION

IGMP Snooping

Select 

Active

 to enable IGMP snooping to forward group multicast traffic only to 

ports that are members of that group. The unknown multicast frames will be 

dropped.
Clear the check box to disable IGMP snooping and the switch forwards any 

unknown multicast frames to all ports.

IGMP Filtering

Select 

Active

 to enable IGMP filtering to limit the IGMP groups a subscriber on a 

port can join. 
Multicast addresses (244.0.0.1 to 244.0.0.254) are reserved for the local scope. 

By default, the switch always allows a frame with a reserved multicast address.

Port

This field displays the port number. 

Immed. Leave

Select this option to set the switch to remove this port from the multicast tree when 

an IGMP version 2 leave message is received on this port. 
Select this option if there is only one host connected to this port. 

Group Limit

Select this option to limit the number of multicast groups this port is allowed to join.

Max. Group Num.  Select this option and enter a number to limit the number of multicast groups this 

port is allowed to join. Once a port is registered in the specified number of 

multicast groups, any new IGMP join report frame(s) is dropped on this port.  

IGMP Filtering 

Profile

Select the name of the IGMP filtering profile to use for this port. 

IGMP Querier 

Mode

This field is applicable on the Ethernet ports. 
The switch treats an IGMP query port as being connected to an IGMP multicast 

router (or server). The switch forwards IGMP join or leave packets to an IGMP 

query port. 
Select 

Auto

 to have the switch use the port as an IGMP query port if the port 

receives IGMP query packets.
Select 

Fixed

 to have the switch always use the port as an IGMP query port. Select 

this when you connect an IGMP multicast server to the port.
Select 

Edge

 to stop the switch from using the port as an IGMP query port. The 

switch will not keep any record of an IGMP router being connected to this port. 

The switch does not forward IGMP join or leave packets to this port. 

Apply

Click 

Apply

 to save your changes back to the switch.

Cancel

Click 

Cancel

 to begin configuring this screen afresh.

Содержание OLT-1308



























































































































































































































































































































Отзывы:

Нет отзывов