ZyXEL Communications OLT-1308 Скачать руководство пользователя страница 227

Страница: 227 / 314

Chapter 34 MAC Table

OLT-1308 Series User’s Guide

227

The following table describes the labels in this screen.

Figure 122

MAC Table: OLT-1308H

The following table describes the labels in this screen.

Table 84

MAC Table: OLT-1308

LABEL

DESCRIPTION

Sort by

Select an option to display and arrange the MAC address information based on the

MAC address, VID or LLID/port number.

Port Select

Select the PON port number or the switch ports (

Switch

) from which you want to get

or clear the MAC address table.

Get

Click

Get

to display the MAC address table on the selected PON port.

Clear Click

Clear

to remove the entries in the MAC table of the selected PON port on the

OLT. The MAC address of the connected ONU is not erased from the MAC table.

Index

This is the incoming frame index number.

MAC Address

This is the MAC address of the device from which this incoming frame came.

VID

This field displays the VLAN ID in which the MAC address belongs.

Port

This is the port number with which the MAC address is associated.

Type

This shows whether the MAC address is

dynamic

(learned by the OLT) or

static

(manually entered in the

Static MAC Forwarding

screen).

Table 85

MAC Table: OLT-1308H

LABEL

DESCRIPTION

Sort by

Select an option to display and arrange the MAC address information based on the

MAC address or LLID.

MAC

Click this button to display and arrange the data according to MAC address.

Port Select

Select the number of the port from which you want to get or clear the MAC address

table.

Get

Click

Get

to display the MAC address table on the selected PON port.

Clear Click

Clear

to remove the entries in the MAC table of the selected PON port on the

OLT. The MAC address of the connected ONU is not erased from the MAC table.

Index

This is the incoming frame index number.

MAC Address

This is the MAC address of the device from which this incoming frame came.

LLID

This is the link ID to which the MAC address is associated.

Type

This shows whether the MAC address is

dynamic

(learned by the OLT) or

static

(manually entered in the

Static MAC Forwarding

screen).

Содержание OLT-1308



























































































































































































































































































































Результаты поиска

Содержание OLT-1308

Отзывы:

ZyXEL Communications OLT-1308, Руководство пользователя, Страница: 227 / 314

Результаты поиска

Содержание OLT-1308

Отзывы: