ZyXEL Communications OLT-1308 Скачать руководство пользователя страница 66

Страница: 66 / 314

Chapter 6 System Status and Port Statistics

OLT-1308 Series User’s Guide

ONU SW Version

This field displays the firmware version the ONU uses.

Up Time

This field displays how long the link connection has been up.

UNI Status

This field displays whether the UNI (User Network Interface) connection is

established and auto-negotiation is enabled.

Link Speed

This field displays the connection speed and the duplex mode (half or full) for

this link.

ONU HW

This field displays the ONU hardware model.

OLT PON Octets

Tx OK

This field displays the number of octets transmitted successfully through the

PON.

OLT PON Frames

Tx OK

This field displays the number of frames transmitted successfully through the

PON.

Total Tx Dropped

This field displays the number of transmitted frames dropped on the PON.

Total Rx Dropped

This field displays the number of received frames dropped on the PON.

Rx FCS Error

This is the number of packets received from the PON with one or more FCS

errors.

Rx Multicast

This field displays the number of multicast packets received.

Tx Multicast

This field displays the number of multicast packets transmitted.

Rx Broadcast

This field displays the number of broadcast packets received.

Tx Broadcast

This field displays the number of broadcast packets transmitted.

ONU Sys Frames

Tx OK

This field displays the number of frames transmitted successfully to the

system.

Total Tx Dropped

This field displays the number of transmitted frames dropped from the

downlink queue due to queue overflow.

Rx OK

This field displays the number of frames received successfully by the UNI

port.

Rx Err

This field displays the number of errored frames received by the UNI port.

Rx Oversized

This field displays the number of oversized frames received by the UNI port.

ONU Sys Octets

Tx OK

This field displays the number of octets transmitted successfully to the

system.

Rx OK

This field displays the number of octets received successfully by the UNI

port.

Rx Err

This field displays the number of errored octets received by the UNI port.

ONU PON Octets

Tx OK

This field displays the number of octets transmitted successfully to the ONU.

Rx OK

This field displays the number of octets received successfully by the ONU.

ONU PON Frames

Total Tx Dropped

This field displays the number of transmitted frames dropped on the ONU.

Table 10

Status: EPON Info: EPON Details (continued)

LABEL

DESCRIPTION

Содержание OLT-1308



























































































































































































































































































































Результаты поиска

Содержание OLT-1308

Отзывы:

ZyXEL Communications OLT-1308, Руководство пользователя, Страница: 66 / 314

Результаты поиска

Содержание OLT-1308

Отзывы: