ZyXEL Communications OLT-1308 Скачать руководство пользователя страница 167

Страница: 167 / 314

Chapter 23 VLAN Profile

OLT-1308 Series User’s Guide

167

Figure 68

EPON VLAN Profile Setup

The following table describes the labels in this screen.

Table 57

EPON VLAN Profile Setup

LABEL

DESCRIPTION

Active

Select this open to enable this VLAN profile.

Name

Enter a descriptive name (up to 20 alpha-numerical characters with spaces allowed)

to identify this VLAN profile.

Upstream

Default VLAN

Rule

Configure the default settings for outgoing traffic (from the ONU to the OLT) that

does not match any VLAN rule below.

Action

Specify the action to perform on the packets.
Select

Add

to insert a VLAN tag to the outgoing packets.

Select

Exchange

to replace the VID with the one specified in the VLAN ID field.

Select

None

to forward packets without any changes.

Содержание OLT-1308



























































































































































































































































































































Результаты поиска

Содержание OLT-1308

Отзывы:

ZyXEL Communications OLT-1308, Руководство пользователя, Страница: 167 / 314

Результаты поиска

Содержание OLT-1308

Отзывы: