ZyXEL Communications Dimension ES-3148, Руководство пользователя

Страница: 241 / 282

Dimension ES-3148 User’s Guide
Chapter 32 Command Examples 239
Figure 137 frame-type Command Example
32.8.9 weight
Syntax:
weight <wt1> <wt2> ... <wt8>
where
An example is shown next.
• Enable WFQ queuing on the switch.
• Enable port two and ports six to twelve for configuration.
• Set the queue weights from Q0 to Q7.
Figure 138 weight Command Example
32.8.10 egress set
Syntax:
egress set <port-list>
where
An example is shown next.
• Enable port-based VLAN tagging on the switch.
• Enable ports one, three, four and five for configuration.
• Set the outgoing traffic ports as the CPU (0), seven (7), eight (8) and nine (9).
ras(config)# interface port-channel 1,3-5
ras(config-interface)# ingress-check
ras(config-interface)# frame-type tagged
<wt1> <wt2> ...
<wt8>
Sets the interface WFQ weighting. A weight value of one to eight is
given to each variable from
wt 1
to
wt 8
.
ras# configure
ras(config)# wfq
ras(config)# interface port-channel 2,6-12
ras(config-interface)# weight 8 7 6 5 4 3 2 1
<port-list>
Sets the outgoing traffic port list for a port-based VLAN.