ZyXEL Communications Dimension ES-3148, Руководство пользователя

Страница: 199 / 282

Dimension ES-3148 User’s Guide
Chapter 31 Introducing the Commands 197
C
H A P T E R
31
Introducing the Commands
This chapter introduces the commands and gives a summary of commands available.
31.1 Overview
In addition to the web configurator, you can use line commands to configure the switch. Use
line commands for advanced switch diagnosis and troubleshooting. If you have problems with
your switch, customer support may request that you issue some of these commands to assist
them in troubleshooting.
Note: See the web configurator parts of this User’s Guide for background information
on features configurable by the web configurator.
31.1.1 Switch Configuration File
When you configure the switch using either the CLI (Command Line Interface) or web
configurator, the settings are saved as a series of commands in a configuration file on the
switch. You can perform the following with a configuration file:
• Back up switch configuration once the switch is set up to work in your network.
• Restore switch configuration.
• Use the same configuration file to set all switches (of the same model) in your network to
the same settings.
Note: You may also edit a configuration file using a text editor.
Make sure you use valid commands. The switch rejects configuration files with
invalid or incomplete commands.
31.2 Accessing the CLI
You can use a direct console connection or Telnet to access the CLI on the switch.
Note: The switch automatically logs you out of the management interface after five
minutes of inactivity. If this happens to you, simply log back in again.