Zycoo CooVox T Series, Руководство администратора и пользователя

Страница: 93 / 147

- 87 - ZYCOO CooVox T-series IP Phone System Admin User Guide v4.0.0
Other feature codes
l
Announce WAN Port IP : By dialing this code you'll hear the system announce the IP address of the IPPBX
WAN interface.
l
Announce LAN Port IP : By dialing this code you'll hear the system announce the IP address of the IPPBX LAN
interface.
l
Announce Extension Number : By dialing this code you can check the extension number of your phone, either
it’s an IP phone or analog phone.
l
One Touch Recording : One Touch Recording is also known as Record on Demand. It allows users to record
phone calls selectively. In a live call conversation, an extension user can use feature code *1 to record this call.
With this feature, you don’t have to configure recording all calls for the extensions which may cause heavy
system resource use if some call recordings are not required.
l
Intercom : The intercom feature code allows you to intercom one extension only. You don’t have to create a
“Paging and Intercom” group for only one extension if you intend to intercom with only that extension.
l
Paging : The paging feature code allows you to page one extension only. It’s the same as the intercom feature
code, the only difference between paging feature code and intercom feature code is by using intercom
feature code both sides can talk to each other but using paging feature code, only the caller can talk to the
called party.
l
Speed Dial : Use speed dial feature code with contact speed dial number to call a contact instead of dial the
contact’s actual number.
l
Meet Me Page : Meet Me Page can be used to page someone over the phones/speakers. The paged person
can use this feature code to terminate the paging and establish an intercom call with the initiator.
l
Switch Phone : When the extension is registered on several different endpoints, you may dial *3 from an idle
endpoint to switch the call to the idle endpoint.