Zycoo CooVox T Series, Руководство администратора и пользователя

Страница: 102 / 147

- 96 - ZYCOO CooVox T-series IP Phone System Admin User Guide v4.0.0
corresponding device IP address should be the IP address of EX16S.
Notice
1
!
After the EX16S is configured, the EX16S system time, ringtone, function keys, etc. do not need to be set. These
system default settings will be automatically synchronized from the IPPBX system. The analog extension on the
EX16S can also maintain the same setting as the IP PBX (except for the functions of the telephone itself).
2. When an EX16S is scanned by an IPPBX and configured, the EX16S will not be scanned by other IPPBXs, including
the EX16S after the IPPBX is reset. The user can make the EX16S to be scanned again by restoring the IPPBX backup,
or reset the EX16S and then reconfigure it through the IPPBX system.
If you need to deploy an EX16S remotely, please click the button.
The difference from the automatic scan configuration is that the manually added EX16S needs to fill in the MAC
address of the remote EX16S and needs to set the server address.
The server address is the custom domain name address in the SIP proxy service you applied for (so you need to
apply for the SIP proxy service first, please refer to the description of the proxy server chapter).
The port number can be 5160 or 5162. Port 5160 is the port number used by the UDP and TCP transmission
protocols of the SIP proxy server. If the port number you specify here is 5160, please assign it to the remote EX16S
extension box. All 16 extensions are set to UDP or TCP protocol; if you want to use port 5162 it means you will use
TLS protocol, please set the transport protocol of these 16 extensions to TLS.
After the settings are completed and submitted, please click on the
button to download the configuration
file. Upload the configuration file through the remote EX16S’s Administration -> Upload Conifg page, to complete
the remote deployment.
Notice
"
The software version of the EX16S extension box needs to be upgraded to 2.3.0 or above to support the remote
deployment function.
Settings
Path: Addons -> Exbox ->Settings
Enabling the Exbox function will increase the system resources consumption and it is recommended to disable this
function after the configuration is completed.