Zycoo CooVox T Series, Руководство администратора и пользователя

Страница: 83 / 147

- 77 - ZYCOO CooVox T-series IP Phone System Admin User Guide v4.0.0
MFC/R2 Signaling
In the E1 settings section and Signaling field by selecting R2 you are able to configure E1 R2 signaling.
In Signaling field select R2, Framing and Coding should use default value. Below in the R2 Signaling Settings
section set the R2 parameters.
l
Variant : Protocol variant setting depends on country and carries.
l
Max ANI : The maximum expected number of ANI digits.
l
Max DNIS : The expected number of dialed digits.
l Get ANI First : The usual behavior for incoming calls is to get the calling party category and the ANI as soon as
possible, and to get the DNIS afterwards. This doesn't work on all systems, so the option to reverse this
behavior is provided.
l
Advanced Protocol File : Additional configurations for R2 signaling.
l
Category : Send calling party’s category. Usually National Subscriber works just fine, you can set other options