Zünd L-1200, Руководство по эксплуатации

Страница: 56 / 142

Controls and operation PN series frame version
Operating unit
4-8
110006,001,11-2009, jmu
4
4.3.6 User-defined function keys
Frequently used functions and commands are assigned to the function keys F1 - F4
by the manufacturer (see user parameters).
The programming for the function keys
– Is specifically adjusted to the tool and material feeding system
– Can be adapted as the customer requires (see command
SET USER KEY (45), point 5.4.3).
4.3.7 User parameters
Nine different groups with user parameters can be called up in the USER submenu.
Each group contains presettings for different applications. The corresponding group
can be called up whenever a tool or material is changed; there is no more need for
time-consuming settings on the operating panel.
The pre-programmed user parameters are listed in the following tables and can be
adapted individually. Use the factory settings as a reference for your application.