Zünd L-1200, Руководство по эксплуатации

Страница: 87 / 142

PN series frame version Controls and operation
Command description
4-39
110006,001,11-2009, jmu
4
Double-sided mode
The selected axis (X or Y ) is mirrored when you switch to double-sided mode.
For this application, it is necessary to mark or fix the position of the material.
REFERENCE (391)
SET VAC (3911, REF + 1/2) This command sets a new reference point.
Procedure:
•
Move the active tool or laser pointer to the new starting point using the arrow
keys.
• Press the REF key on the operating unit and set the reference point (1 or 2) by
pressing the appropriate key.
The reference point:
– May not be altered during a job
– Refers to the active tool or, if installed, the laser pointer
When you press the "REF" key, the following menu appears:
SET REFERENCE 1 (3911) Reference point no. 1 is set.
GO REFERENCE 1 (3912) The machine moves to reference point no. 1.
CLEAR & GO (3913) Deletes the reference point(s) and moves to the original reference point.
GOTO XY (3914)
GOTO X (39141) A point can be set precisely by entering the X coordinate.
GOTO Y (39142) A point can be set precisely by entering the Y coordinate.
MOVE Y2 (3915) This command is valid only for the LC-16/52 and LC-27/32 cutters.
SET REFERENCE 2 (3916) Reference point no. 2 is set.
Double reference point X Double reference point Y
1 Ref. pt. 1 2 Ref. pt. 2