Zünd L-1200 Скачать руководство пользователя страница 28

Страница: 28 / 142

Safety

PN series frame version

Rules and safety at work

3-6

110005,001,11-2009, jmu

3.7

Rules and safety at work

•

The operation of the machine is always subject to local regulations regarding sa

fety at work and accident prevention.

•

Before the machine is put into operation: Always check the safety equipment and

protective covers.

•

If a hazardous situation occurs, switch the machine from the ONLINE operating

status to the STOPPED/OFFLINE operating status:
– Switching can be carried out by pressing the ONLINE button on the operating

unit

– By pressing one or more direction keys (emergency stop function).

•

You are not permitted to make unauthorised modifications and changes to the

machine which might affect the system's safety. Accessories or spare parts pro

duced by other manufacturers may only be used with the machine with the writ

ten approval of the manufacturer.

•

Only service personnel authorised by the manufacturer are permitted to install,

commission, maintain and repair the machine.

•

Before carrying out any maintenance, repair and modification work:
– Switch the machine off using the on/off switch and secure with a lock
– Prevent the machine being switched on inadvertently by removing the mains

supply cables to the distribution box (several mains connections).

3.8

Procedure in case of malfunctions

In principle, any troubleshooting work or inspection on the cutter is to be carried out

only when it is switched off.
The following must never be by-passed or rendered ineffective:
•

Light barriers and protective trip switches on the bar

•

Monitoring sensors

•

Safety and control switches in the machine

If malfunctions cannot be remedied by the operators using simple measures, then

the responsible service station must be informed.

Содержание L-1200















































































































































Результаты поиска

Содержание L-1200

Отзывы:

Похожие инструкции для L-1200

Бренды по названию

Популярные бренды

Zünd L-1200, Руководство по эксплуатации

Результаты поиска

Содержание L-1200

Отзывы:

Похожие инструкции для L-1200

Бренды по названию

Популярные бренды