14/71
User Manual for hybrid inverter HYD 10-20KTL-3PH - Rev. 1.0 of 25/08/2020
Identification: MD-AL-GI-00
Identification: MD-AL-GI-00
Rev. 4.0 of 31.01.18 - Application: GID
19
16-pin COM connector
1
20
Manual
1
21
Warranty
1
22
Registration form
1
Table 3- Package contents
3.3.
Requirements for the installation environment
DO NOT install the HYD 10-20KTL-3PH on top of flammable materials.
DO NOT install the HYD 10-20KTL-3PH in an area used for the storage of
flammable or explosive materials
Danger
The casing and heat sink are very hot while the inverter is running, therefore
DO NOT install the HYD 10-20KTL-3PH in places where it can be accidentally
touched
Caution
Consider the weight of the HYD 10-20KTL-3PH when transporting and moving
the inverters. Choose an appropriate mounting position and surface. Assign at
least two people to install the inverter
Attention
The packaging materials and components can be damaged during transport. Therefore, check the
outer packaging before installation; check that the materials are not punctured, torn or ripped. In case
of damage, do not unpack the inverter and contact the seller as soon as possible. It is recommended to
remove the packing materials within 24 hours before installing the inverter.
