6、COOLING SYSTEM COMPONENT
56
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1051454-014000 9.8×2.5 acrylic o-ring
3
2
1274200-186000 ZT310-V Frame bypass oil pipe
1
3
1251100-061093 M6×22 Hex flang bolt thread level 8.8 (color zinc)
3
4
1251100-089094 oil bolt M14×1.50×32
3
30±2N.m
5
1244100-034000
combined sealing gasket φ14×φ20×2
6
6
1274200-189000 ZT310-V Engine outlet oil pipe
1
7
1244200-015000 ZT310-R Engine inlet oil pipe
1
A
E
Change engine oil
B
C
D
Fig.7 COOLING SYSTEM
COMPONENT
PROCEDURE:
●
Chassis connected oil tube
Disassemble oil passing bolt
⑷
,take off 2 pieces combination seal
⑸，
pictured A
。
Disassemble bolt
⑶
close to engine with socket sleeve. Disassemble chassis connected oil tube. Take off O-ring
●
Engine oil outlet tube
Disassemble oil passing bolt
⑷
, Remove 2seal gasket
⑸
with socket sleeve
，
pictured B
Disassemble oil passing bolt
⑷
, seal gasket
⑸
with socket sleeve
，
pictured C
Disassemble bolt
⑶
with socket sleeve. Take off engine oil outlet tube
⑹
, engine oil intake tube
⑺，
pictured
D
。
The oil outlet pipe
⑹
and the oil inlet pipe
⑺
, Remove 2 o-ring
⑴
.
CAUTION:
●
Disassembling the cooling system while the motorcycle is hot is prohibited. Wait until the engine and muffler
cool down thoroughly for the manipulation.
●
Wasted engine oil should be collected and hand over to qualified facilities for further treatment. Do not pour
the oil anywhere and avoid pollution of environment and water source.
●
Do not disassemble the oil tube violently in case of deformation of bush.
●
To avoil leakage, changing seal gasket and O-ring every time together with engine oil is suggested.
●
Be sure to wipe the connecting surface with clean nonwoven before reassembling.
