3、INTAKE SYSTEM COMPONENT
24
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1251100-102000 Non-standard bolt M6×16
（
304stainless steel
）
1
2
1251100-101000 Non-standard bolt M6×12
（
304stainless steel
）
2
3
1244200-095000
ZT310-V carbon Tank adsorption Tube (Φ 5 × Φ 11)
1
5
1274200-088000 ZT310 water pipe clamp
（
φ10.5
）
2
Fig.10 INDUCTION
SYSTEM COMPONENT
Replace the air filter element (Bosch) 2
PROCEDURE:
●
Right side
Remove the bolt
⑴
at the right disc brake oil cup; move the disc brake oil cup to the side to ensure that the oil
cup cover faces upward.
Remove the two bolts
⑵
of the right PKE mainframe bracket, and arrange the cables.
●
Air filter
Clamp the hoop with pliers
⑸
and remove the boss on the canister. Pull out the suction tube
⑶
and pull out the
intake pipe
⑷
.
Place a rag under the air filter and use a needle-nose pliers to pull out the waste tubing at the bottom.
CAUTION:
●
Always keep the disc brake oil cup cover facing up.
●
When pulling out the tube, you should not directly clamp it with a nipper pliers to prevent leakage or oil
leakage.
1
Intake Manifold of Solenoid Valve for ZT310-V
carbon Tank (Φ 5 × Φ 11 / Φ 7 × Φ 13)
1244200-096000
4
