11、REAR COVER COMPONENT
100
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1250105-142093 GB5789M8×20
（
color zinc
）
3
2
1251100-101000 Non-standard bolt M6×12 (304 stainless steel)
2
4024200-044052 ZT310-V rear aluminimum holder
4024200-073051 ZT310-V rear aluminum alloy bracket (dark gray matte)
4
4044201-255051 ZT310-V PKE cover (dark grey)
1
5
1251100-117093 Non-standard inner hex bolt M8×25
（
color zinc
）
2
6
1240300-071000 Flanging bushing rubber
（
φ11×φ16×1
）
2
7
1251100-102000 Non-standard bolt M6×16
（
304 stainless steel
）
6
8
1274100-057095
Flanging bushing φ6.2×φ8.5×3.5
＋
φ14×1.5
4
9
1244100-052000 Buffer rubber of flanging bushing
（
φ8.5×φ14×1
）
6
PROCEDURE:
●
Rear aluminum alloy bracket
Remove the bolt
⑴
and bolt
⑵
; take off the bracket
⑶
.
●
Rear cover trim cover
Remove PKE small cover
⑷
after pressing down.
Remove the two bolts
⑴
on the bottom , remove the cushion rubber
⑹
.
Remove the bolt
⑺
on the front right trim cover , remove the bushing
⑻
and cushion rubber
⑼
.
Remove the bolt
⑺
on the front left trim cover , remove the bushing
⑻
and cushion rubber
⑼
.
Remove the bolt
⑺
on the front middel trim cover , remove the bushing
⑻
and cushion rubber
⑼
.
Pull out the nail in front of the tail light assembly and the trim cover then remove it.
CAUTION:
●
The material should be protected during discomponent to prevent scratching the lamp.
●
Never pull the cable directly.
Fig.6 REAR COVER
COMPONENT
Tail skirt taillight component 3
1
3
