© 2016 ZOLL Data Systems, Inc. All rights reserved.
79
CONFIDENTIAL TRADE SECRETS – DO NOT DISCLOSE.
Z
O
L
L
D
o
c
u
m
e
n
t
a
t
i
o
n
2.
Once the application loads you’re placed in the “File” page as seen here.
3.
The first action to take is to press the appropriate link where it says “Load factory default configuration
for”. Once loaded, a confirmation dialog box will pop up which can be acknowledged and closed by just
pressing “OK”.
THE GENERAL TAB
1.
Location - Set the appropriate time zone and desired date format using the drop down.
2.
Display – Generally the defaults for these settings work fine.
3.
Power –
a.
Ignition Shutdown Time - Select a desired time frame for the ignition shutdown timer. This
setting determines how long the camera will stay active before going into standby mode after
the ignition is switched off.
b.
Days in LPS – This field allow for the setting of the number of days the camera will stay in
standby mode before it’s completely powering down.
Please change this setting to a value
of at least 1.
