© 2016 ZOLL Data Systems, Inc. All rights reserved.
18
CONFIDENTIAL TRADE SECRETS – DO NOT DISCLOSE.
Z
O
L
L
D
o
c
u
m
e
n
t
a
t
i
o
n
RS-4107 OBDII Adapter
1.
Locate and identify the vehicles OBDII port (driver’s side dash) and unbolt the connector.
2.
Mount the connector end of the ZOLL OBDII Harness in its place and connect the vehicle’s port to the
matching receptacle on the ZOLL OBDII cable. Secure all wiring to prevent interference with vehicle foot
controls or any other moving components under the dash.
Typical Routing – Connect inline to the vehicle DLC connector. Route the harness through the dash, through
center console or floor trim panel to the RS-4000 location. Connect to the V CAN port on the RS-4000.
Do not
extend or modify this cable
to exceed the OEM 16’ (4.87m) maximum length.
NOTE:
The vehicle Speed and RPM signals are obtained through the OBDII/CAN connection.
