7
Atlas Bio Series Access Control Panels Installation Guide
Copyright©2020 ZKTeco USA. All rights reserved.
1. Important Safety Precautions
The following precautions are to keep user’s safe and prevent any damage. Please read carefully before
installation.
1. Read, follow, and retain instructions -
All safety and operational instructions must be properly read and
followed before bringing the device into service.
2. Do not ignore warnings -
Adhere to all warnings on the unit and in the operating instructions.
3. Accessories -
Use only manufacturer-recommended or product-sold accessories. Accessories not recom-
mended by the manufacturer must not be used.
4. Precautions for the installation –
Do not place this device on an unstable stand or frame. It may fall and
cause serious injury to persons and damage to the device.
5. Service -
Do not try to service this unit yourself. Opening or removing covers may expose you to hazard-
ous voltages or other hazards.
6. Damage requiring service -
Disconnect the system from the main AC or DC power source and refer ser-
vice personnel under the following conditions:
•
When cord or connection control is affected.
•
When liquid was spilled, or an item dropped into the system.
•
If exposed to water and/or inclement weather (rain, snow, etc.).
•
If the system is not operating normally under operating instructions.
Just change controls defined in operating instructions. Improper adjustment of other controls
may result in damage and involve a qualified technician to return the device to normal operation.
•
When system or cabinet is damaged.
7. Replacement parts -
When replacement parts are needed, service technicians must only use replace-
ment parts provided by the supplier. Unauthorized substitutes can result in burn, shock or other hazards.
8. Safety check -
On completion of service or repair work on the unit, ask the service technician to perform
safety checks to ensure proper operation of the unit.
9. Power sources -
Operate the system only from the label's power source form. If the sort of power supply
to use is unclear, call your dealer.
10. Lightning -
External lightning conductors can be installed to protect against electrical storms. It stops
power-ups destroying the system.
11. The devices should be installed in areas with limited access.
