Ziton ZP2-AF2-P, Руководство по установке

Страница: 87 / 176

Chapter 3: Configuration and commissioning
ZP2-A Series Installation Manual 81
Device LEDs
Select the Device LEDs configuration option to disable addressable device LEDs
flashing during communication with the control panel in devices that support this
feature. By default device LEDs flash.
To change the configuration:
1. Select Panel setup from the Main menu.
2. Select Other settings, and then select Device LEDs.
3. Select YES or NO.
4. Press F4 (Enter), and then press F1 (Back).
5. Press F1 (Save), F3 (Apply), F4 (Discard), or F2 (Exit).
Remember to apply saved settings from the Main menu.
Self-test
Select Self-test to schedule a functional self-test for each loop device and to
generate a daily report in devices that support this feature. By default self-test is
not enabled.
To change the configuration:
1. Select Panel setup from the Main menu.
2. Select Other settings, and then select Self-test.
3. Select and check the Enabled check box.
4. Select TestH, and then enter the start time for the self-test (00:00 to 23:59).
5. Select ReportH, and then enter the time for the report to be generated (00:00
to 23:59).
6. Press F4 (Enter), and then press F1 (Back).
7. Press F1 (Save), F3 (Apply), F4 (Discard), or F2 (Exit).
Remember to apply saved settings from the Main menu.