Zimmer ZLipo Med, Инструкция по эксплуатации

Страница: 33 / 44

Functional test
15
Page 25
A function test should be carried out if you have any doubts about whether the
device is functional.
Note: Check whether the applicators are correctly connected to the device before carrying
out the function test.
Check whether the power cable is correctly connected to the device and live.
Functional test Switch device on.
Select an applicator that is connected to the device.
Press the start button on the screen.
The LEDs on the applicator turn blue and cooling starts.
The animation on the screen starts, and the time starts to count down.
Note: Switch off ZLipo
Med
after the functional test has been completed.
If the device is to be used immediately afterwards, adjust the desired treatment
parameters and proceed as described in chapter 7.