Zimmer ZLipo Med, Инструкция по эксплуатации

Страница: 19 / 44

Default settings
7
Page 11
Program screen
(in auto mode) 1
8 7 6
11 10
(1) Selected applicator The selected applicator (left, right or both) is shown in orange. Press the
corresponding button to switch applicator.
(2) Treatment time The remaining treatment time is displayed.
(3) Temperature The temperature in the applicator is displayed.
(4) Vacuum intensity The vacuum intensity is displayed. Press the arrows to increase or decrease the
vacuum.
Vacuum intensity: 1 – 10. The intensity is preset at 5.
(5) Operating mode Press the corresponding button to select the operating mode (auto or manual), which
is then displayed in orange.
(6) Program Program sequences are displayed.
(7) Phase setting Menu selection to change program sequences.
(8) Start of treatment Press the start button to start treatment.
(9) Sounds Switches signal sounds on and off by pressing a button.
(10) Background
colour
(11) Reset treatment
time
Changes the display background colour from dark to light and vice versa. The device
is automatically switched off and back on when this is done.
Pressing the reset button sets the treatment time back to the beginning.
2
3 4
5
9