Zimmer ZLipo Med, Инструкция по эксплуатации

Страница: 18 / 44

Default settings
7
Page 10
Start-up screen
Self-test
ZLipo
Med
carries out a self-test after it has been switched on. The current status of
pre-cooling can be read off during the test.
Applicator selection Once precooling has been completed, the user can select the left applicator, the
right applicator or both applicators.
Note: Depending on the area to be treated, treatment can be carried out with just one
applicator (left or right) or with both applicators at the same time.
Note: The program settings and changing the settings are the same for each of the 3
possible selections. Consequently, the section below describes the individual steps
only for treatment with the left applicator.
The selected applicator (left, right or both) is shown in orange.