Cleaning
Disinfection
10
Page 18
Note:
Always keep the device and handpieces clean in order to achieve optimum results.
Before starting any maintenance and cleaning measures the device must always be
switched off at the main switch and the mains cable must be disconnected.
Cleaning the device while it is in operation can be dangerous for the user and/or the
device.
Neither the device nor the handpieces may be immersed in liquid.
Make sure that during cleaning and disinfection no liquids penetrate the device. Do
not use sprays.
If during cleaning or disinfecting liquid penetrates the device, please put the device
out of service, protect it from being used again and contact your service
representative.
Make sure that when cleaning and disinfecting the labelling of the device (such as
warnings, labels of control devices, identification plate) is not damaged.
Note:
If 70% isopropyl alcohol is used for cleaning, the device must be completely dry
before being used.
The device and its applied part are considered as uncritical in relation to hygiene
when used on non-injured and healthy skin.
Applicators
Use a soft cloth for cleaning and disinfection.
The inner surfaces of the applicator must be cleaned with a damp cloth after each
use.
Содержание ZLipo Med
