Zimmer Sonido Smart, Инструкция по эксплуатации, Страница: 76 / 173

61
6.1.4
[DEL]
The main functions of this button are as follows:
In freeze-frame status, press [DEL] to delete all measurement results, comments and traces.
6.1.5
[Change]
Press [Change] to switch to another menu; press [Exit] to exit the menu;
6.1.6
[Exit]
Press [Exit] to exit the measurement menu.
6.1.7
Parameter control button
Press the corresponding button to update the function and use this function.
6.2
B mode general measurement methods
The system B mode contains distance, ellipse, and trace.
6.2.1
Distance meas.
Measurement steps:
1. Press the [Calc] button to enter the measurement. Update the [distance] item in the menu or press the quick measure-
ment button [Dist], and this displays a segment “+” icon.
2. Move the “+” icon using the cursor to adjust the one point of the line. Press the [ENTER] key to fix the start point and
the cursor can be moved to the next position.
3. The [UPDATE] key can be used to change the activated point, and to adjust another point of the line.
4. Move the cursor to the end-point and press [ENTER] again to complete the measurement. 5. After the measurement,
the result is displayed in the measurement results area.
6. Repeat steps 1 to 4 to start the next “distance” measurement. Press the [DEL] key to delete all measurements.
NOTE:
Each measurement group has a limited number of measurements; if the measurement results exceed this, a new
measurement group is added automatically.
6.2.2
Ellipse
Measurement steps:
1. Press the [Calc] button to enter the measurement. Update the point for the [Ellipse] in the menu or press the button for
[Ellipse] quick measurement; a segment "+" icon is then displayed.
2. Move the “+” icon using the cursor, press the [ENTER] key to fix the point, and the cursor can be moved round to form
a circle.
3: By pressing the [UPDATE] key, the activated and fixed points can be switched.
4. Move the cursor to the end point of the ellipse, press [ENTER] to fix the axis, and at the same time, the next axis is
updated, and the size of the axis can be changed using the cursor.
5: You can exit step 4 using the [UPDATE] button.