Zimmer Sonido Smart Скачать руководство пользователя страница 18

Страница: 18 / 173

NOTE:

The system has a built-in screensaver to prevent damage to the display. It is not recommended to continually turn the

unit on and off. To dispose of this product properly, please contact your local service department.

2.2

Electrical safety

Type of device protection against electric shock

CLASS I DEVICE

, where protection against electric shock is based not solely on BASE ISOLATION; the device also has

protective earthing. This additional safety precaution prevents exposed metal parts from becoming LIVE should there be

an insulation failure.

Degree of protection against electric shock
Type BF applied part

(for probes marked with the BF symbol)

TYPE BF APPLIED PART, providing a specified degree of protection against electric shock, in particular with regard to

the permitted leakage current.
BF: Insulation against earth; max. patient leakage current: under normal conditions < 100 μA,
in the event of the first failure < 500 μA

Degree of protection against harmful ingress of water

The parts of the probe that are likely to come in contact with the user or the patient meet the requirements for protection

against dripping water (IPX1). The parts of the probe that are intended for immersion in the course of normal use meet

the requirements for protection against temporary submersion (IPX7). The IP classification of the device is that for ordi-

nary devices (no protection, IPX0).

Safety level for use in oxygen-enriched environments, inflammable anaesthetics or other inflammable or com-

bustion-promoting substances

The device is not suitable for use in oxygen-enriched environments, inflammable anaesthetics or other inflammable or

combustion-promoting substances.

Содержание Sonido Smart














































































































































































Результаты поиска

Содержание Sonido Smart

Отзывы:

Zimmer Sonido Smart, Инструкция по эксплуатации, Страница: 18 / 173

Результаты поиска

Содержание Sonido Smart

Отзывы: