Zimmer Sonido Smart, Инструкция по эксплуатации, Страница: 37 / 173

22
3.5.1
Environmental conditions
The system should be operated under the following environmental conditions.
Technical specifications:
AC/DC adapter: Input: 100-250 V ~, 50-60 Hz, 1.5-0.75 A
Output: 19 V , 3.15 A
Main unit: 19 V , 3.15 A OR Battery: 14.8 V , 4400 mAh
Dimensions: 335 mm length × 155 mm width × 350 mm height
Weight: approx. 6 kg
3.5.1.1
Required operating environment
Ambient temperature: 10°C to 40°C
Relative humidity: 30% to 75% RH non-condensing
Atmospheric pressure: 700 hPa to 1060 hPa
Strong sources of radiation or strong electromagnetic waves (e.g. electromagnetic waves from radio transmissions) can
lead to ghost images or noises. The system should be isolated from such sources of radiation or electromagnetic waves.

Direct sunlight

Sudden changes in temperature

Dust

Vibration

The proximity of heat generators

High humidity
Note:
This equipment generates, uses and can radiate radio frequencies. The equipment may cause radio frequency interfer-
ence with other medical and non-medical equipment and radio communications. To provide proper protection against
such interference, this product adheres to the emission limits for Group 1, Class A of the Directive for Medical Devices,
as defined in EN 60601-1-2. However, this does not guarantee that there will be no interference after installation.
If it is determined that this equipment is causing interference (as can be ascertained by the device being turned on and
off), the user (or qualified service personnel) should try to remedy the problem using one or more of the following
measures:

• Reorienting or repositioning the affected devices

• Increasing the separation between the equipment and the affected device

• Supplying power from another source that is not the source powering the affected device.

• Consulting the vendor or service representative for further suggestions.