Zimmer Sonido Smart, Инструкция по эксплуатации, Страница: 55 / 173

40
5.6.5
PW
Display PW mode
5.6.6
M speed adjustment
In real-time M status, press the corresponding button for [Speed] to adjust the M speed within the range of 1~4.
5.6.7
GAIN
In real-time status, rotate the [Gain] button to adjust the gain, in increments of 5 within a range of 0~255.
5.6.8
STC
STC can be used to adjust the gain compensation at different image depths.
The following two methods of adjustment are available:
1: Pull the slider of the STC to set the value.
2: If the lock (AIO button) is not activated, the STC curve automatically appears on the left side of the screen as soon as
an STC control is operated. The STC curve disappears automatically one second after adjustment is complete.
5.6.9
Depth
Press the [DEPTH/ZOOM] selection knob until the indicator for [DEPTH] lights up, then rotate the knob to change the
depth of the image.
5.6.10
Focus
Press the [FOCUS] selection knob until the [FOCUS] indicator lights up. Then turn the knob to change the focus position.
5.6.11
Angle
Change the sampling line angle of the sampling gate in PW mode. Press [ANGLE/ZOOM] and confirm that the light for
ANGLE is lit; the sampling line rotates with the direction.
5.6.12
ANGLE/ZOOM
Press the [ANGLE/ZOOM] knob until the [ANGLE] indicator lights up, and the angle of the sample gate rotates in the
direction of rotation.
Press the [ANGLE/ZOOM] knob to confirm that the ZOOM knob is lit. When the zoom box appears, turn the knob to
select the zoom increments.
5.6.13
INVERT
In B mode and B/M mode, the image can be inverted horizontally and vertically.
If you press the key, the displayed image is reversed in the right-left horizontal direction.
If you press the key, the displayed image is inverted in the up-down direction.
The horizontal flip status indicators from the upper-left corner of the image window have the following meanings: