Zimmer Sonido Smart Скачать руководство пользователя страница 116

Страница: 116 / 173

101

7.4

Body markers

User interface for body marker setup

7.4.1

Library of body markers

Integrated body markers: Abdomen, obstetrics, GYN, cardiology, small parts, urology, vascular
Press the [BodyMarkerLib] arrow key and display the name of the integrated body markers and the required body mark-

ers using the trackball and [ENTER] button.

7.4.1.1

Edit the body marker library

Operation:

Press [ENTER] on [Edit body marker type] to display the input box.

Input the name into the newly created body markers box, move the cursor to the [Create] button, and then press

[ENTER]; the new body markers are then created and appear in the list of selected body markers.

Move the cursor onto [Delete] and press [ENTER] to delete the current body markers in the selected list.

Change the current name of the annotation status list in the [Current name type] input box and press [ENTER] on

[Rename]; then rename the selected body markers.

Содержание Sonido Smart














































































































































































Результаты поиска

Содержание Sonido Smart

Отзывы:

Zimmer Sonido Smart, Инструкция по эксплуатации, Страница: 116 / 173

Результаты поиска

Содержание Sonido Smart

Отзывы: