INSTALLATION AND OPERATING INSTRUCTIONS:
Gripper, pneumatically intelligent, GPP/GPD5000-IL series
41
Zimmer GmbH
●
Im Salmenkopf 5
●
77866 Rheinau, Germany
●
+49 7844 9138 0
●
+49 7844 9138 80
●
www.zimmer-group.com
DDOC00247 / d
EN / 2020-07-20
19. Declaration of Incorporation
In terms of the EU Machinery Directive 2006/42/EC (Annex II 1 B)
Name and address of the manufacturer:
Zimmer GmbH
Im Salmenkopf 5
►
D-77866 Rheinau, Germany
+49 7844 9138 0
+49 7844 9138 80
www.zimmer-group.com
We hereby declare that the incomplete machines described below
Product designation: 2-jaw parallel gripper/3-jaw concentric gripper, pneumatically intelligent
Type designation: GPP/GPD5000IL series
conforms to the requirements of the Machinery Directive, 2006/42/EC, Article 2g, Annex VII,b – Annex II,b, in their design
and the version we put on the market.
The following harmonized standards have been used:
Basic health and safety requirements:
No. 1.1.2, No. 1.1.3, No. 1.1.5, No. 1.3.1, No. 1.3.2, No. 1.3.4, No. 1.3.7, No. 1.5.1, No. 1.5.3, No. 1.5.4, No. 1.6.4, No. 1.7.1,
No. 1.7.3.
DIN EN ISO 12100:2011-03 Safety of machinery – General principles for design – Risk assessment and
risk
reduction
DIN EN 60204-1 Safety of machinery – Electrical equipment of machines, part 1
DIN EN ISO 13849-1 Safety of machinery – Safety-related parts of control systems
DIN EN ISO 13849-2 Safety-related parts of control systems
A full list of applied standards can be obtained from the manufacturer.
We also declare that the specific technical documents were produced in accordance with Annex VII Part B of this Directive.
We undertake to provide the market supervisory bodies with electronic versions of special documents for the incomplete
machine through our documentation department, should they have reason to request them.
Commissioning of the incomplete machine is prohibited until it has been found that—where applicable—the machine
in which the above-mentioned incomplete machine is to be installed complies with the Machinery Directive (2006/42/
EC).
Authorized representative for the compilation of
relevant technical documents
Kurt Ross
See manufacturer's address
Rheinau, Germany, 4/30/2020
Martin Zimmer
First name, last name
Address
(Place and date of issuance)
(Legally binding signature)
Managing Partner
