Zhone IMACS 8000, Руководство пользователя

Страница: 695 / 788

Reference Guide B-21
SNMP Options not available on this CPU.
The current CPU card does not support SNMP configuration.
Specify Sys Ph# before activating REMOTE vt100.
You must enter the Integrated Access System’s phone number before a remote operator can
connect to the system.
SR TS overlapping.
The subrate circuit assigned does not allow enough space for a previously assigned circuit on
the same subrate time slot. For example, if you have a 19.2 kbps device on subrate time slot 1
in b-5 framing, you cannot assign another 19.2 kbps circuit to subrate time slot 2, because the
circuit on 1 actually occupies subrate time slots 1 and 2. You must therefore assign that other
circuit to subrate time slot 3 or 4.
Switch request sent to card.
The system has sent your redundancy switchover command to the associated card.
Switchover must be made from the primary WAN.
You cannot switch to a redundant WAN port from another redundant WAN port. You can only
switch from a primary port to a redundant port.
Test function is not available.
The selected test is not available on the current card.
Test in progress. No changes from this screen.
You cannot change any settings in this screen while a card test is in progress.
Test is not available in slc96.
You cannot perform this test on an slc96 WAN port.
This option not available on INTF-2.
You cannot perform this action on the current Interface card.