Zhone IMACS 8000, Руководство пользователя

Страница: 548 / 788

20-4 Server Cards
Model No.
Running Head
Analog Bridge Server Card User Screens and SettingsAnalog Bridging Serv-
Table 20-2 summarizes the configuration settings for the Analog Bridge Server Card, along
with the available and factory-default option settings. The parameters and settings are also
described in the following paragraphs.
Table 20-2. Analog Bridge Main Screen Option Settings and Defaults
BRIDGE ST.
The State setting determines whether the Bridge is active or inactive. An inactive Bridge does
not occupy a time slot on a WAN link. Set the state setting to stdby (standby) for Bridges that
are not being used or have not yet been configured. Set it to actv (active) for Bridges that are
ready for use.
MAX PORTS
This number is set by the user to define the number of ports to assign to the bridge, from 2 to
32.
NOTE: increasing this number requires that the bridge be taken out of service. If a bridge may
grow one day, it may be advisable to over-provision the number of ports. If a three-port bridge
is needed, the operator could see the potential for growth and set this number to five. If in the
future a fourth and fifth participant needs to be added, then this can be done without taking the
bridge out of service since the max ports setting allows for growth. If however max ports is
set to match the current requirement of three, then the bridge would need to be taken out of
service for a fourth participant to be added.
Copy Copies the contents of the current column to the next column. Useful if you
change a lot of entries in one column and want to repeat those changes in
subsequent columns.
< View the previous eight bridges
> View the next eight bridges
sWitch Switch the card with the redundant card
Ports Displays the Ports assigned to the selected Bridge.
All ports Displays all Ports assigned to any bridge.
Goto Goto a user specified bridge number
Main returns to the Systems Main Screen. If changes are made to settings and not
saved, you will be prompted to either save or lose your changes.
Parameter User Options Default
BRIDGE ST. stdby actv rdnt stdby
MAX PORTS Provision the bridge with up to 32 participants 0
PORTS USED This field is Display Only, from 0 to 30 ports n/a
BRDG TYPE voice voice
GAIN 0dB -3dB -6dB 0dB