Zhone IMACS 8000, Руководство пользователя

Страница: 585 / 788

Server Cards 21-27
IPR*4 Router Card IPR*4PPP Configuration Screens and Settings
Table 21-5.
IPR*4 Interface Name Screen Action
Add
The add command allows the user to add a new ethernet port interface name and IP address
association, or a new HDLC port IP address and name association. PPP IP address
associations should not be added here.
Del
Del allows the user to delete the IP address to name association, as long as that association is
not in use.
Find
Provides the user the ability to find a particular string in a name. For example, if the user knew
that the string ATL was in use then the user could use the find function and search for the string
“ATL”. Similarly, the user could search simply for “A”.
Find next
The find next command allows the system to scroll to the next occurrence of the string entered
in the Find command. With 128 addressable ports, this is a useful function to locate end points
through potentially several pages of entries without having to use the page up and down
functions.
21.10.4 IPR*4 Ethernet Connectivity Screen
Once the interface name and associated address has been described, then the individual jacks
on the ethernet side can be setup. The IPR*4 card has four ethernet RJ-45 jacks, and these are
individually addressable.The eNet screen is shown in Figure 21-17. This screen will display
all four ethernet jacks available on the faceplate of the card. Depending on the card software
Action Function
Ref Refresh the current screen.
Add Adds a new Interface name
dEl Deletes the currently selected Interface name if not in use.
PgUP Scrolls up one page.
PgDn Scrolls down one page.
Find Searches to find an interface name
find Next When searching for a name, uses the same Find parameters but locates
the next occurrence in the Interface name table.
Main Go back to the IP Interface Main Menu Screen.