Zhone IMACS 8000, Руководство пользователя

Страница: 341 / 788

System Cards 9-41
WAN Card WAN Card User Screens and Settings
9.4.5 Far-End Performance Data
The Far-End Performance Data Screen is similar to the Performance Data Screen. The same
statistics are collected in a slightly different manner. Figure 9-23 shows a typical display of
far-end network register data in the AT&T mode. To view the far-end performance data, press
“f” (Farstat command) in the WAN Card Main Screen.
When Farstat is selected in the T1 AT&T mode, an FDL message is sent to the far end,
requesting the network register data from there. This data is displayed on the local terminal.
There will be a slight time delay in the data display.
When Farstat is selected in the ANSI T1.403 mode, the far end generates one-second
performance reports and sends them to the local system, where they are then stored.
To view E1 far-end statistics, you must select c-sa4 as the COM/NMS RP setting.
Figure 9-23.Typical Far-End Performance Data Screen
Note: Astericks (*) are displayed when performance data is unavailable.
Press “c” (Clear command) from the bottom line of this screen to send a FDL message to the
far end and also clear the local display. The following message will now appear: