Zhone IMACS 8000, Руководство пользователя

Страница: 633 / 788

Server Cards 24-7
PWE Card PWE Card User Screens and Settings
The basic philosophy of the Pseudowire card offering is to keep all the user (DS0 level)
provisioning the same for individual circuits to the WAN, and then convert the WAN from an
electrical to a virtual facility. By this method there is no need to introduce or learn a new
cross-connect methodology, but rather make all the connections as normally done on the
IMACS user cards and then convert the WAN facility itself from an electrical transport to an
IP-centric transport out the faceplate of the PWE card.
Table 24-3 below shows these PWE screen settings, the options and the default settings.
24.3.2 Main Screen Option Settings
Following is each parameter in more detail.
Table 24-2. PWE Card Setting Options and Defaults
Parameter User Options Default
STATE stdby actv rdnt stdby
STATUS Down Up (rate full) Down, read only field
IP ADDR 0.0.0.0 to 255.255.255.255 0.0.0.0
NET MASK 0.0.0.0 to 255.255.255.255 0.0.0.0
DEFAULT GW 0.0.0.0 to 255.255.255.255 0.0.0.0
SPEED auto 100/fd auto
CONNECTOR rj45 sfp rj45
MAC ADDR Display only Read only, the card’s MAC address
GLOBAL SETTINGS Display only Defaults chosen at card bring-up
TYPE wan pwan wan
STATE - stdby actv - (not applicable)
WAN Display only. Will show
information once a
Pseudowire is provisioned - (not applicable)
STATUS - down up - (not applicable).
CLK - comm adapt - (not applicable).
CLK STATUS - acq locked - (not applicable).