ZENN
iO
AVANCE
Y
TECNOLOGÍA
www.zennio.com
5
2. INSTALLATION
2.1. ZAS INSTALLATION
ZAS is connected to the KNX installation as any other KNX device, through the
KNX connector placed at the back.
For installing ZAS, first it is necessary to fix the metallic piece into the
squared/rounded standard box where it is going to be installed, with the corresponding
screws.
Next, the KNX bus and the inputs terminal must be connected using the
corresponding connectors; both terminals are placed in the rear part of the device.
Once inputs and bus KNX are connected, the device is fitted in the metal platform
thanks to the included magnets.
Finally, it is necessary to check, from both sides, that nothing unless the ZAS
outline can be seen (the metal platform should be completely hidden by ZAS).
This device does not need any additional external power supply since it is powered
through the KNX bus.
For further information about the installation and technical characteristics, look up
the
ZAS Datasheet
, available at
www.zennio.com
and in the packaging of the product.
Elements
Description
Figure 2 Elements description
Nº
Description
1
EIB Connector
2
Temperature sensor
3
Programming button
4
Programming LED
5
Inputs
6
Magnet
7
Tactile area
8
Display
9
IR Receiver
