ZENN
iO
AVANCE
Y
TECNOLOGÍA
www.zennio.com
1
1
Initial updating
This functionality allows re-establishing the value of the general indicators as
well as the values of the 1-bit objects associated to the buttons, after a power
failure. Moreover, this functionality allows establishing a delay for sending the initial
values since the power is recovered.
Remote control
ZAS counts on a remote control that can be enabled/disabled by parameter.
Each button of the room controller has its equivalent button in the remote
control (See
4.IR Control
). Besides them, the remote control has several buttons
that allow the execution of special functions.
Internal temperature sensor
ZAS has an internal temperature probe with an associated communication
object. This communication object can be configured for being periodically sent to
the bus or after a temperature change.
Contrast level
The initial contrast level can be set, although it could be changed by users in
the
Configuration
menu, according to their needs.
Screens
In the section
Screens,
the
Screensaver
can be enabled for showing the time, the
temperature or both of them, alternating the data every 4 seconds.
The
Information Screen
can be also enabled in this menu. It shows an image of
the touch buttons with their corresponding label in the display, when the central area of
the controller (among the touch buttons) is pressed, during 10 seconds or until next
press.
Figure 5 Information Screen
On the other hand, the
Menu
and the
General Indicators
of the device can be
enabled for their configuration in additional section of menu:
