ZENN
iO
AVANCE
Y
TECNOLOGÍA
www.zennio.com
1
7
6. PARAMETERIZATION
For carrying out the parameterization of the room controller ZAS, it is necessary,
once the ETS is open, importing the product data base ZAS 1.0.vd2.
Next, ZAS must be added to the project where the device is required and, clicking
the right button of the mouse on the device, the
Edition of Parameters
must be selected
for beginning the configuration.
In the following sections there is a detailed description about the parameterization
of the different functionalities of the device in ETS.
6.1. DEFAULT CONFIGURATION
This section shows the default configuration of the device.
When opening “
Edit parameters”
the first time, the default
General
configuration
will appear.
The following figure shows the appearance of the window
General
:
Figure 6 Default General Configuration
If the
Inputs
and
Buttons
are selected, it will be seen that ZAS has two inputs and
8 buttons, disabled by default.
