ZENN
iO
AVANCE
Y
TECNOLOGÍA
www.zennio.com
3
3
Figure 25 Buttons Configuration
The
Pair buttons configuration
parameter sets whether the right button is used
for On/Increment value sending and the left button is used for Off/Decrement value
sending, or the opposite.
Once the type of operation (individual or couple) is selected, the functionality of
each button or couple of buttons can be configured.
Individual Operation
The configuration options for the individual operation of the buttons are the
following:
¾
1 bit:
it allows sending the value “0”, “1”, or toggle between them. There is
an associated 1-bit communication object called
Binary control
.
If the
Toggle
option is selected, the parameter
LED lighting
will appear.
This parameter enables the
Regular
lighting, during some seconds when
the button is pressed, or
Status-dependent
lighting, where the LED of the
button will light while the object status is “1” and it will remain switched off
when the object status is “0”.
