ZENN
iO
AVANCE
Y
TECNOLOGÍA
www.zennio.com
2
3
¾
Special Function 2
: configurable for sending value “1”, value ”0” or
switching between these values.
Note
: The remote control blocking is configured in the window
Touch Blocking
, since
it can be only blocked with the Touch panel altogether.
In case of
Initial Updating
and
Contrast Level
, once enabled, it is only necessary
to directly introduce the desired delay and the contrast level in the window
General
.
¾
Initial Updating
: Yes or No.
→
Delay
: value between 0 and 255, in seconds.
¾
Contrast Level
: default contrast value between 0 (minimum luminosity)
and 20 (maximum luminosity)
Moreover, in the window
General
the different screens and general indicators can
be enabled:
Screensaver
It allows configuring the information to show in the display when being in
screensaver mode:
9
Only
Time
9
Only
Temperature
9
Time + Temperature (switches between time and temperature every 4
seconds)
The time interval between the last key-press and the screensaver mode can be
also selected.
General Indicators
It enables a window where specifying up to
6 indicators
of different types:
binary, counter, percentage, enumeration and float.
According to the type of indicator, the application program allows introducing a
series of additional data, such as the indicator name (name that will be shown in
the display for each indicator), a message or label for different status, units, etc.
