ZENN
iO
AVANCE
Y
TECNOLOGÍA
www.zennio.com
1
2
General indicators
ZAS allows the configuration of up to
6 indicators
that will be shown in the
display every time the display is pressed or after the execution of an action
associated to a key-press.
Each indicator has associated one communication object and it will show the
pre-configured text message and the value received by the communication object
from another device through the bus.
There are 5 types of indicators:
9
Binary
(1 bit): it shows different texts according to the received value.
9
Counter
(1 byte): it shows the received value (0-255).
9
Percentage
(1 byte): it shows the received value (0-100%).
9
Enumeration
(1 byte): it allows the introduction of up to 6 numerical
values with their corresponding labels (configurable texts by parameter).
9
Float
(2 bytes): it shows the received value specifying the units
(configurable text by parameter).
Menu
In the section
Menu,
the different options of ZAS can be enabled. When each of
these options is enabled, it could be configured selecting the corresponding section
in the lateral menu of the parameters edition.
The
default password
for restricted access to menu options, buttons and the
own
Menu
screen can be enabled/disabled in this section.
Each option allows introducing the name that will be shown in the display when
the menu is accessed:
Thermostat
ZAS offers the option of activating the thermostat for the following:
9
Heating: this option includes Freezing protection
9
Cooling: this option includes Overheating protection.
9
Heating and cooling
In case the mode
Heating and Cooling
is enabled, the a
utomatic switching
between heating and cooling
can be activated.
Moreover, ZAS allows selecting one or two temperature sources as
reference temperature
. In case of using two temperature sources, the values
provided by these sources will be mixed in a proportion configurable by
parameter.
