Zennio Touch-MyDesign Display One, Руководство пользователя

Страница: 35 / 48

Touch-MyDesign
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
35
Figure 25 Short press: light dimming (inputs > push button)
The available actions are: Light OFF (the value “0” will be sent), Light ON
(the value “1” will be sent), Light ON/OFF (Toggle) (after the first press the
value “1” will be sent; after the second press, the value “0” will be; and so
on after any subsequent presses, commuting the value every time),
Decrease light / Stop dimming (Toggle) (after the first press the bus will be
sent an order to decrease the light level according to the parameterized
light step: 100%, 50%, 25%, 12.5%, 6.25%, 3.1% or 1.5% (see
Table 2
),
while after the second press, the value “0” will be sent; and so on after any
subsequent presses, commuting the value every time), Increase light / Stop
dimming (Toggle) (after the first press the bus will be sent an order to
increase the light level according to the parameterized light step: 100%,
50%, 25%, 12.5%, 6.25%, 3.1% or 1.5% (see
Table 2
), while after the
second press, the value “8” will be sent; and so on after any subsequent
presses, commuting the value every time) and Light dimming (toggle) (a
combination of the two previous cases, according to the sequence increase
light → stop → decrease light → stop).

Sending of a scene : the KNX bus will be sent a certain scene value
through the “[Ix] [Short Press] ACTION” object, where “ACTION” will
depend on the action configured from the corresponding screen displayed
by ETS:
Figure 26 Short press: scene (inputs > push button)