Zennio Touch-MyDesign Display One, Руководство пользователя

Страница: 10 / 48

Touch-MyDesign
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
10
3 ETS PARAMETERIZATION
To begin with the parameterization process of the device, it is necessary, once
the ETS program has been opened, to import the database of the product ( Touch-
MyDesign application program).
Next, the device should be added to the project where desired. And then, one right-
click on the device will permit selecting "Edit parameters", in order to start the
configuration.
In the following sections a detailed explanation can be found about each of the different
functionalities of Touch-MyDesign in ETS.
3.1 DEFAULT PARAMETERIZATION
This section shows the default configuration from which the device
parameterization starts.
Figure 5
shows the communication objects displayed by default: “[General] Scene:
receive” (intended for the reception of scene values from the bus), “[General] Scene:
send” (destined to send scene values to the bus), “[General] Buzzer enabling” (for
enabling or disabling the beeping functionality, which may also be set by parameter,
although disabling it by parameter will have a permanent effect and will hide this object)
and “[General] Buzzer” (which makes it possible to externally triggering a brief beep at
any time –beyond the usual behaviour of these beeps as action confirmations–
whenever the state of the “[General] Buzzer enabling” object permits it).
Figure 5 Default topology
When entering the parameter edition of Touch-MyDesign for the first time, a window
similar to
Figure 6
will be shown, where three main sections are available: General ,
Main buttons and Additional buttons , which are described next.