Zennio Touch-MyDesign Display One, Руководство пользователя

Страница: 11 / 48

Touch-MyDesign
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
11
3.2 GENERAL
The windows under the “General” tab permits configuring the basics of the device.
The only of them that is active by default is “Configuration”.
Figure 6 Configuration (General)
Touch-MyDesign orientation. Defines the orientation (horizontal / vertical)
of the device, with the aim of implementing a logical behaviour in the buttons.
Figure 7 Orientation of the device
Next to “Touch-MyDesign Orientation”, a second parameter is shown, “ Pair
button behaviour ”. The selectable values for this parameter will depend on the
selection made for the former parameter.
Table 1
shows the possible behaviours
of the pair buttons. The option selected here will affect every button configured as
a pair control. Note that if the device is mounted with a layout inverted to what is