Zennio Touch-MyDesign Display One, Руководство пользователя

Страница: 33 / 48

Touch-MyDesign
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
33
Figure 21 Configuration (inputs)
Within the “Inputs” tab, the “Configuration” window will be available by default, from
where it is possible to select the number of inputs to be configured as well as their
types, after which two more tabs will be displayed, in order to parameterize the
behaviour of the selected inputs.
3.5.1 PUSH BUTTON
Configuring an input as a push button will require the definition of the actions to be
performed on the event of button presses (both short and/or long).
Figure 22 Push button (inputs)
The available options are:
Short press : permits selecting an action to be performed when a short press
takes place:

No action : no action will be performed.

1-bit generic control : on button presses the KNX bus will be sent the “[Ix]
[Short press] 1-bit generic control: B” 1-bit communication object with value
B, where B (“0”, “1” or a value that commutes with every press) as well as
the possibility of making this sending periodical can be parameterized from
the new screen displayed by ETS when required (see Figure
Figure 23
). For