Zennio Touch-MyDesign Display One, Руководство пользователя

Страница: 37 / 48

Touch-MyDesign
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
37
3.5.2 SWITCH/SENSOR
Figure 27 Switch/sensor (inputs)
Configuring an input as a switch/sensor will require the definition of the actions to
be performed (all of them through the “[Ix] Edge: binary control” object) on the event of
a change in the logical level of the input line. A new screen is displayed for that
purpose.
The available options are:
Rising edge : selects the action triggered by a rising edge in the line (which
takes place whenever the switch closes the circuit):
No action : no action is triggered.
Send 0 : the value “0” is sent through the “[Ix] Edge: binary control” object.
Send 1 : the value “1” is sent through the “[Ix] Edge: binary control” object.
Toggle 0/1 : after the first press, the value “1” will be sent through the “[Ix] Edge:
binary control” object; after the second press, the value “0” will be sent. And so
on with the subsequent presses, commuting the value every time.
Falling edge : selects the action triggered by a falling edge in the line (which
takes place whenever the switch opens the circuit). The available options are
analogous to those in the “Rising edge” parameter.