Touch-MyDesign
Technical Support:
http://zennioenglish.zendesk.com
12
(i.e., with the additional buttons on the left or on the top), the
meaning of the words “left” and “right” should be assumed inverted as well.
Note: this parameterization does not alter the names of the touch buttons or of
their objects. It does not affect the behaviour of the non-pair buttons (such as the
additional buttons) either.
Orientation
Pair Button behaviour
Vertical
Left: off / decrease
Right: on / increase
Left: on / increase
Right: off / decrease
Horizontal
Down: off / decrease
Up: on / increase
Down: on / increase
Up: off / decrease
Table 1
Orientation vs. pair button behaviour
LED lighting
. In addition to the specific behaviour of every LED regarding its
own button (see section 2.2), it is possible to define certain general attributes that
will affect all the LEDs. For that purpose, this parameter provides two options:
Default
: the LEDs will assume the default light levels for the “on” and “off”
states (maximum level and minimum level, respectively).
Custom
: permits the definition of custom light levels for the “on” and “off”
states of the LEDs, as well as enabling complementary functionalities, like
the night mode or the LED flashing object. For that purpose, after selecting
this option a new screen will come up (
LED lighting
; see
), where the
following parameters can be found:
Normal mode
: this section is provided for defining the desired lighting
level (“max” or “min”) for the “on” state of the LEDs under normal
condition, and, analogously, the desired level (“off”, “min” or “max”) for
the “off” state of the LEDs, under normal condition. The default values
are respectively “max” and “off”.
In addition to this normal mode it is also possible to implement a night
mode with its own light parameterization (equal or different to that of
