Zennio MAXinBOX FC 0-10V VALVE, Руководство пользователя

Страница: 8 / 60

MAXinBOX FC 0-10V VALVE
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
8
2.2 INPUTS
MAXinBOX FC 0-10V VALVE incorporates 2 analogue/digital inputs, each configurable
as a:
Binary Input , for the connection of a pushbutton or a switch/sensor.
Temperature Probe , to connect a temperature sensor as models
ZN1ACNTC68 S/E/F and ZN1AC-SQAT (SQ-AmbienT) from Zennio.
Motion Detector , to connect a motion detector (models ZN1IO-DETEC-P
and ZN1IO-DETEC-X from Zennio).
For detailed information about the functionality and the configuration of the parameters
involved, please refer to the following specific manuals, available under the
MAXinBOX FC 0-10V VALVE product section, at the Zennio homepage,
www.zennio.com ):
“ Binary Inputs in MAXinBOX FC 0-10V VALVE ”,
“ Temperature Sensor in MAXinBOX FC 0-10V VALVE ”,
“ Motion Detector in MAXinBOX FC 0-10V VALVE ”.
Notes :
The ZN1IO-DETEC-P motion detector is compatible with a variety of Zennio
devices. However, depending on the device it is actually being connected to,
the functionality may differ slightly. Therefore, please refer specifically to the
aforementioned manual “ Zennio Motion Detector for MAXinBOX FC 0-10V
VALVE ”.
Motion detectors with references ZN1IO-DETEC and ZN1IO-DETEC-N are
not compatible with MAXinBOX FC 0-10V VALVE (may report inaccurate
measurements if connected to this device).
When connected to MAXinBOX FC 0-10V VALVE, the rear micro-switch of
model ZN1IODETEC-P should be set to position “ Type B ”.