MAXinBOX FC 0-10V VALVE
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
6
2
CONFIGURATION
2.1
GENERAL
ETS PARAMETERISATION
Figure 2
General screen.
After importing the corresponding database in ETS and adding the device into the
topology of the desired project, the configuration process begins by right-clicking into
the device and selecting
Edit parameters
.
This will bring the window shown in Figure 2. From this screen it is possible to
activate/deactivate all the required functionality through the corresponding checkboxes:
Once activated,
Inputs, Binary Outputs, Analogue Outputs, Fan Coil,
Logical Functions, Thermostats
and
Manual Control
(enabled by default)
bring additional tabs to the menu on the left. These functions and their
parameters will be explained in later sections of this document.
Note
:
when the Fan Coil function gets enabled, the checkboxes to enable the
Binary Outputs and the Analogue Outputs will become locked as these
outputs are required for the fan coil control. Nevertheless, they may become
unlocked again depending on how the fan coil module is configured.
Sending of Indication Objects (0 and 1) on Bus Voltage Recovery
: this
parameter lets the integrator activate two new communication objects (“
Reset
